How to effectively solve the stone engraving machine spindle rust?
The hardness of stone is higher, and the requirements for engraving machine are higher than other engraving materials.
Therefore, relatively speaking, the performance of stone engraving machine is also very high.
Stone engraving machine can be used for stone lettering, stone relief, stone positive carving, stone negative carving, stone line carving, stone cutting, stone hollow out, suitable for tombstone carving, stone carving handicraft and other work piece carving manufacturing.
With more and more users of CNC engraving machine, stone engraving machine also gets more attention.
Due to the influence of the working environment, the motor spindle of the stone engraving machine will rust. If it is not processed for a long time, it will shorten the life of the spindle motor and affect the use of the stone engraving machine.
The following small series for you to introduce the stone engraving machine spindle rust solution
A, physical method of rust removal: by hand knocking, shoveling, scraping, brushing, sand or flexible down to eliminate the surface rust scale, oxide skin, etc., this is the painter's radical rust removal method, can also use shovel knife, scraper, hammer, steel wire brush, emery cloth, saw blade and other tools, is the most convenient method.
Two, chemical method of rust removal: you can use WD-40 cleaning lubricant, evenly sprayed on the motor, about half an hour can use cotton cloth to erase the rust on the stone engraving machine, if the rust is severe, you can make several times.
WD-40 is non-conductive and provides excellent lubrication.
The above is the method of dealing with the rust of the stone engraving machine, and we must pay more attention to it in the ordinary application.
The hardness of stone is higher, and the requirements for engraving machine are higher than other engraving materials. Therefore, relatively speaking, the performance of stone engraving machine is also very high.
